Annapolis, MD Chimney Services
Chimney Waterproofing in Annapolis, MD
Chesapeake Bay moisture is relentless. Chimney waterproofing with a vapor-permeable sealer stops water intrusion while letting your masonry breathe—protecting brick, mortar, and liner for years. Serving Anne Arundel County.

The Annapolis Problem
Why Waterproofing Is Essential Near the Bay
Annapolis averages 44 inches of rain per year—with the added burden of 75–80% summer relative humidity and salt-laden air from the Chesapeake Bay. Brick is a highly porous material: a standard Annapolis chimney can absorb a gallon or more of water during a heavy rainstorm. That moisture then migrates through the masonry, oxidizing steel components, softening mortar joints, and exiting as efflorescence (the white mineral staining on exterior brick).
The fix is not to paint or coat the chimney—solid coatings trap moisture inside the masonry and accelerate the freeze-thaw spalling they’re meant to prevent. The correct product is a vapor-permeable penetrating sealer (silane-siloxane chemistry, such as ChimneySaver) that repels liquid water while allowing the brick to release internal moisture vapor.
💧 Stops Absorption
Penetrating sealers reduce brick water absorption by up to 99.9%, preventing the saturation cycle that causes freeze-thaw spalling and liner damage.
🌬️ Breathable Formula
Unlike paint or solid coatings, vapor-permeable sealers let internal moisture vapor escape. Trapping moisture causes blistering and accelerates brick failure.
🧂 Salt-Air Resistant
Siloxane chemistry bonds at the molecular level to silica in brick, resisting the salt-sulfate attack that degrades unsealed masonry within a few miles of tidewater.
What’s Included
Chimney Waterproofing Service — What We Do
Pre-Treatment Inspection
Waterproofing applied over compromised mortar or cracks is wasted money. We inspect and document the chimney exterior first, recommend any needed tuckpointing or crown repair, then apply sealer after those repairs cure.
Two-Coat Application
ChimneySaver Water Repellent (or equivalent penetrating siloxane) is applied in two coats by brush or low-pressure sprayer. The second coat goes on while the first is still wet (wet-on-wet technique) for full penetration depth.
Coverage Area
We treat all exposed masonry surfaces above the roofline: all four chimney faces, the crown (if not being rebuilt), and the top three courses of brick at the roofline where flashing meets masonry.
10-Year Performance
ChimneySaver carries a 10-year warranty against water penetration when properly applied. We document the application for your records.
⚠️ License & Product Check
Chimney waterproofing is a home improvement service requiring MHIC licensure in Maryland. Additionally, the product matters enormously:
- Ask for the product name and verify it is a vapor-permeable (breathable) formula—not a paint or solid coat
- Verify the contractor’s MHIC license at mhic.maryland.gov
- Confirm a pre-treatment inspection is included—sealing over cracked masonry traps moisture
- Get a written warranty specifying coverage period and what’s included
- Ask whether the price includes crown and mortar joint inspection or only sealer application
Frequently Asked Questions
Waterproofing FAQs — Annapolis
How often should I waterproof my chimney in Annapolis?
Most quality penetrating sealers last 8–10 years under normal conditions. In Annapolis’s salt-air, high-humidity environment we recommend inspection every 5 years and reapplication when the brick begins absorbing water again. A simple water droplet test shows absorption within seconds on a surface that needs retreatment.
Can I waterproof a chimney with existing efflorescence?
Efflorescence must be cleaned first with an appropriate masonry cleaner—sealing over it locks the salts inside. The source of moisture causing efflorescence (usually a cracked crown or failed flashing) must also be repaired before waterproofing, or the sealer will trap moisture and accelerate the damage.
Is chimney waterproofing worth it?
In Annapolis’s climate, yes. A $300–$600 waterproofing treatment prevents the $2,000–$8,000 masonry repair bills that result from years of unchecked water intrusion. Waterproofing is most cost-effective when done preventively on a chimney in good condition, not as a last resort after significant damage has occurred.
What is the difference between chimney waterproofing and chimney painting?
Chimney paint creates a solid film on the surface that traps moisture vapor inside the brick. When that trapped moisture freezes, it expands and forces the paint—and the brick face—off the wall. Penetrating waterproofers soak into the brick pores and repel liquid water without blocking vapor transmission. Paint is never the correct waterproofing solution for masonry chimneys.
Protect Your Chimney Before the Next Bay Storm
We connect Annapolis homeowners with MHIC-licensed chimney professionals for waterproofing, tuckpointing, and full masonry evaluations.
Get a Free Estimate →Related services: flashing repair, crown repair
Areas where we most often perform waterproofing: Eastport, Bay Ridge — and throughout Annapolis and Anne Arundel County.
