Chimney Chase Cover Installation — Annapolis, MD
The chase cover is the flat metal cover that sits on top of a prefabricated (factory-built) chimney’s wood-framed chase — different from a masonry chimney cap. When a galvanized chase cover rusts through, water entry into the chase cavity causes the accelerated wood-frame deterioration that can cost thousands to repair. Annapolis Chimney Pros connects you with specialists who replace galvanized chase covers with stainless steel covers sized precisely to your chase dimensions.
(667) 493-2060 — Chase Cover AssessmentGalvanized vs. Stainless Steel Chase Cover
Galvanized Steel — Why It Fails
Most prefabricated chimneys installed in Anne Arundel County homes from the 1980s through the 2000s came with galvanized steel chase covers. Galvanized coating provides corrosion resistance for approximately 10–15 years in Annapolis conditions — shorter for waterfront properties where salt-air chloride accelerates zinc depletion. Once the galvanized layer is consumed, the steel beneath rusts rapidly, developing rust-stained drips on the chase siding and eventually rusting through entirely.
304 or 316L Stainless — The Correct Replacement
Stainless steel chase covers are custom-fabricated to fit the exact dimensions of your chase opening. 304 stainless is appropriate for most Anne Arundel County inland properties. 316L marine-grade stainless is recommended for Eastport, Bay Ridge, and waterfront properties within a half-mile of tidal water, where chloride exposure significantly exceeds the threshold where 304 begins to show pitting. A properly fabricated stainless cover with a saddle center and hemmed drip edges will outlast the building structure it protects.
Chase Cover Pricing — Annapolis (2024)
| Cover Type | Typical Range | Notes |
|---|---|---|
| Galvanized replacement (standard sizes) | $75 – $200 | Short service life; not recommended |
| 304 stainless custom-fabricated | $200 – $500 | Standard inland properties; custom fit |
| 316L stainless marine-grade | $300 – $700 | Waterfront properties; Eastport, Bay Ridge |
| Chase cover + cap (combined) | $350 – $800 | Both components replaced in one visit |
Frequently Asked Questions — Chase Cover Annapolis
How do I know if my chase cover is rusting through?
Visible rust staining on the chase siding below the chase top is the primary indicator — the stain tracks rust washing off the cover. You can also inspect from the ground with binoculars after rain — a rusted cover shows orange-brown discoloration and may have visible holes. Ceiling staining adjacent to the prefab fireplace chase is a secondary indicator, suggesting water has already entered the chase cavity.
Is chase cover replacement different from cap replacement?
Yes. A masonry chimney has a chimney cap that covers the flue opening in the crown. A prefab chimney’s chase cover is a large flat metal panel that covers the entire top of the wood-framed chase structure — it may also have one or more chimney caps integrated into it or mounted on it. Both components are assessed when the technician accesses the top of the chase.
Schedule a Chase Cover Assessment
Annapolis Chimney Pros connects you with chase cover specialists serving Annapolis, Eastport, Arnold, Severna Park, Bay Ridge, Riva, and all of Anne Arundel County. Custom stainless covers fabricated to your chase dimensions.
(667) 493-2060 — Call Now